If cable/wire is blocking internal lights

There is a cable in the way of the internal lights. To open the cover and move it:
1. Unplug
2. Lay face up on table
3. Remove 8 screws securing the cover from the back.
4. Carefully remove cover.
5. Check for a ribbon cable that is in the way of the internal LEDs. (should be close to the number 10 on the dartboard)
7. Be careful not to move the cameras at all.
6. Route the cable so it doesn't interfere. It can be taped to the backboard if needed.
7. Carefully reassemble, making sure not to catch the ribbon cables in the cover.